[Nagios-users] NRPE 2.12 installation issue

[Tim Van Caeyzeele]

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F [phone]
***@cernum.com
www.cernum.com
 please consider the environment before printing this ema

[Tom DE BLENDE (EECC) (DHL)]

Try "make all" ;-)

[Tim Van Caeyzeele]

Hi Tom,

Sorry for not being complete, I tried that aswell ;)

***@SV0007:~/downloads/nrpe-2.12# make all
make: *** No rule to make target `all'. Stop.

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:37
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Try "make all" ;-)

[Tom DE BLENDE (EECC) (DHL)]

Tim,

Did ./configure run successfully? Can you double check?

Tom


-----Original Message-----
From: Tim Van Caeyzeele [mailto:***@cernum.com]
Sent: Wednesday, June 11, 2008 09:38
To: Tom DE BLENDE (EECC) (DHL); nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Hi Tom,

Sorry for not being complete, I tried that aswell ;)

***@SV0007:~/downloads/nrpe-2.12# make all
make: *** No rule to make target `all'. Stop.

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:37
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Try "make all" ;-)

[Tim Van Caeyzeele]

Hi Tom,

It runs ok except for the SSL part

checking for SSL headers... configure: error: Cannot find ssl headers

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:46
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Tim,

Did ./configure run successfully? Can you double check?

Tom


-----Original Message-----
From: Tim Van Caeyzeele [mailto:***@cernum.com]
Sent: Wednesday, June 11, 2008 09:38
To: Tom DE BLENDE (EECC) (DHL); nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Hi Tom,

Sorry for not being complete, I tried that aswell ;)

***@SV0007:~/downloads/nrpe-2.12# make all
make: *** No rule to make target `all'. Stop.

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:37
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Try "make all" ;-)

[Tom DE BLENDE (EECC) (DHL)]

Tom

OK, then it didn't run OK ;-) Install openssl-devel and try again.

Good luck,
Tom

-----Original Message-----
From: Tim Van Caeyzeele [mailto:***@cernum.com]
Sent: Wednesday, June 11, 2008 10:07
To: Tom DE BLENDE (EECC) (DHL); nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Hi Tom,

It runs ok except for the SSL part

checking for SSL headers... configure: error: Cannot find ssl headers

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:46
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Tim,

Did ./configure run successfully? Can you double check?

Tom


-----Original Message-----
From: Tim Van Caeyzeele [mailto:***@cernum.com]
Sent: Wednesday, June 11, 2008 09:38
To: Tom DE BLENDE (EECC) (DHL); nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Hi Tom,

Sorry for not being complete, I tried that aswell ;)

***@SV0007:~/downloads/nrpe-2.12# make all
make: *** No rule to make target `all'. Stop.

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:37
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Try "make all" ;-)

[Tim Van Caeyzeele]

Aah great,

Problem solved!

I'm running ubuntu and I installed libcurl13-openssl-dev which did the trick ;)

Thnx for the support Tom!

Regards,

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 10:20
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Tom

OK, then it didn't run OK ;-) Install openssl-devel and try again.

Good luck,
Tom

-----Original Message-----
From: Tim Van Caeyzeele [mailto:***@cernum.com]
Sent: Wednesday, June 11, 2008 10:07
To: Tom DE BLENDE (EECC) (DHL); nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Hi Tom,

It runs ok except for the SSL part

checking for SSL headers... configure: error: Cannot find ssl headers

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:46
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Tim,

Did ./configure run successfully? Can you double check?

Tom


-----Original Message-----
From: Tim Van Caeyzeele [mailto:***@cernum.com]
Sent: Wednesday, June 11, 2008 09:38
To: Tom DE BLENDE (EECC) (DHL); nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Hi Tom,

Sorry for not being complete, I tried that aswell ;)

***@SV0007:~/downloads/nrpe-2.12# make all
make: *** No rule to make target `all'. Stop.

Tim.

-----Original Message-----
From: Tom DE BLENDE (EECC) (DHL) [mailto:***@dhl.com]
Sent: woensdag 11 juni 2008 9:37
To: Tim Van Caeyzeele; nagios-***@lists.sourceforge.net
Subject: RE: [Nagios-users] NRPE 2.12 installation issue

Try "make all" ;-)

[Jay R. Ashworth]

Post by Tim Van Caeyzeele
Aah great,
Problem solved!
I'm running ubuntu and I installed libcurl13-openssl-dev which did the trick ;)
Thnx for the support Tom!

And, generally:

####
If you are compiling programs on a Linux distribution that uses package
management (RPM, DEB, whatever) to install software, and you find tat
configures or makes are dying because they can't find libraries or
header files, there is almost certainly an extra package file you need
to install. These are conventionally called -dev or -devel, and
otherwise named after whatever package they go with.
####

That is all. This is a recording. Congrats on getting it built. :-)

Cheers,
-- jra

Post by Tim Van Caeyzeele
Regards,
Tim.
-----Original Message-----
Sent: woensdag 11 juni 2008 10:20
Subject: RE: [Nagios-users] NRPE 2.12 installation issue
Tom
OK, then it didn't run OK ;-) Install openssl-devel and try again.
Good luck,
Tom
-----Original Message-----
Sent: Wednesday, June 11, 2008 10:07
Subject: RE: [Nagios-users] NRPE 2.12 installation issue
Hi Tom,
It runs ok except for the SSL part
checking for SSL headers... configure: error: Cannot find ssl headers
Tim.
-----Original Message-----
Sent: woensdag 11 juni 2008 9:46
Subject: RE: [Nagios-users] NRPE 2.12 installation issue
Tim,
Did ./configure run successfully? Can you double check?
Tom
-----Original Message-----
Sent: Wednesday, June 11, 2008 09:38
Subject: RE: [Nagios-users] NRPE 2.12 installation issue
Hi Tom,
Sorry for not being complete, I tried that aswell ;)
make: *** No rule to make target `all'. Stop.
Tim.
-----Original Message-----
Sent: woensdag 11 juni 2008 9:37
Subject: RE: [Nagios-users] NRPE 2.12 installation issue
Try "make all" ;-)

[[mailto:] On Behalf Of Tim Van Caeyzeele]

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit
http://www.nagios.org/download/ for links to the latest
versions). At the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config
file.
make install-plugin
make install-daemon
make install-daemon-config
=20

-----Original Message-----
From: nagios-users-***@lists.sourceforge.net
[mailto:nagios-users-***@lists.sourceforge.net] On Behalf Of Tim Van
Caeyzeele
Sent: Wednesday, June 11, 2008 09:34
To: nagios-***@lists.sourceforge.net
Subject: [Nagios-users] NRPE 2.12 installation issue

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers
eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know
how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F
[phone] ***@cernum.com www.cernum.com P please
consider the environment before printing this email

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for just about anything Open
Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.=20
::: Messages without supporting info will risk being sent to /dev/null

[[mailto:] On Behalf Of Tim Van Caeyzeele]

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit
http://www.nagios.org/download/ for links to the latest
versions). At the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config
file.
make install-plugin
make install-daemon
make install-daemon-config


-----Original Message-----
From: nagios-users-***@lists.sourceforge.net
[mailto:nagios-users-***@lists.sourceforge.net] On Behalf Of Tim Van
Caeyzeele
Sent: Wednesday, June 11, 2008 09:34
To: nagios-***@lists.sourceforge.net
Subject: [Nagios-users] NRPE 2.12 installation issue

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers
eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know
how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F
[phone] ***@cernum.com www.cernum.com P please
consider the environment before printing this email

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for just about anything Open
Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null

[[mailto:] On Behalf Of Tim Van Caeyzeele]

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit
http://www.nagios.org/download/ for links to the latest versions). At
the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config
file.
make install-plugin
make install-daemon
make install-daemon-config


-----Original Message-----
From: nagios-users-***@lists.sourceforge.net
[mailto:nagios-users-***@lists.sourceforge.net] On Behalf Of Tim Van
Caeyzeele
Sent: Wednesday, June 11, 2008 09:34
To: nagios-***@lists.sourceforge.net
Subject: [Nagios-users] NRPE 2.12 installation issue

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers
eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know
how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F
[phone] ***@cernum.com www.cernum.com P please
consider the environment before printing this email

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for just about anything Open
Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null

[[mailto:] On Behalf Of Tim Van Caeyzeele]

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit
http://www.nagios.org/download/ for links to the latest versions). At
the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config
file.
make install-plugin
make install-daemon
make install-daemon-config


-----Original Message-----
From: nagios-users-***@lists.sourceforge.net
[mailto:nagios-users-***@lists.sourceforge.net] On Behalf Of Tim Van
Caeyzeele
Sent: Wednesday, June 11, 2008 09:34
To: nagios-***@lists.sourceforge.net
Subject: [Nagios-users] NRPE 2.12 installation issue

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers
eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know
how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F
[phone] ***@cernum.com www.cernum.com P please
consider the environment before printing this email

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for just about anything Open
Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null

[[mailto:] On Behalf Of Tim Van Caeyzeele]

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit
http://www.nagios.org/download/ for links to the latest versions). At
the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config
file.
make install-plugin
make install-daemon
make install-daemon-config


-----Original Message-----
From: nagios-users-***@lists.sourceforge.net
[mailto:nagios-users-***@lists.sourceforge.net] On Behalf Of Tim Van
Caeyzeele
Sent: Wednesday, June 11, 2008 09:34
To: nagios-***@lists.sourceforge.net
Subject: [Nagios-users] NRPE 2.12 installation issue

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers
eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know
how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F
[phone] ***@cernum.com www.cernum.com P please
consider the environment before printing this email

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for just about anything Open
Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null

[[mailto:] On Behalf Of Tim Van Caeyzeele]

iv. Install the NRPE daemon
Download the source code tarball of the NRPE addon (visit
http://www.nagios.org/download/ for links to the latest versions). At
the time of writing, the latest version of NRPE was 2.8.
cd ~/downloads
wget http://osdn.dl.sourceforge.net/sourceforge/nagios/nrpe-2.8.tar.gz
Extract the NRPE source code tarball.
tar xzf nrpe-2.8.tar.gz
cd nrpe-2.8
Compile the NRPE addon.
./configure
make all
Install the NRPE plugin (for testing), daemon, and sample daemon config
file.
make install-plugin
make install-daemon
make install-daemon-config


-----Original Message-----
From: nagios-users-***@lists.sourceforge.net
[mailto:nagios-users-***@lists.sourceforge.net] On Behalf Of Tim Van
Caeyzeele
Sent: Wednesday, June 11, 2008 09:34
To: nagios-***@lists.sourceforge.net
Subject: [Nagios-users] NRPE 2.12 installation issue

Hi Guys,

I've just tried installing NRPE 2.12 for monitoring my servers
eventviewer etc..

However I'm getting the following error:

1) I downloaded the latest stable version 2.12
2) I extracted the tarball
3) I ran the ./configure script
4) I tried the make install wich gives me the following error:

***@SV0007:~/downloads/nrpe-2.12# make install
make: *** No rule to make target `install'. Stop.

Any ideas anyone ? Most likely it's easy to solve, but I don't know
how..

Regards,

Tim Van Caeyzeele
IT Administrator

Cernum | Kareelstraat 48 | 9300 Aalst | Belgium | T [phone] | F
[phone] ***@cernum.com www.cernum.com P please
consider the environment before printing this email

------------------------------------------------------------------------
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for just about anything Open
Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when
reporting any issue.
::: Messages without supporting info will risk being sent to /dev/null